Acoustical Solutions

420 37th Street NW Suite D
Auburn, WA 98001
3041 North 31st Avenue
Phoenix, AZ 85017
tel:  253-876-0075
fax: 253-876-0077
tel: 480-955-7708

I-PIN – TIE WIRE ANCHOR

The I-Pin is a 1/4″ concrete expansion wedge anchor designed for use in suspended ceiling tension applications. It is an excellent choice when powder actuated pins are not practical. Such as fastening into very hard concrete with hard aggregate or in hospitals. A pre-drilled 1/4″ x 1 1/4″ hole is required for installation.

Compare to:

Hilti’s Ceiling Anchor HHDCA 1/4″®

Red Head’s 1/4″ x 2-1/8″ Tie Wire Wedge Anchor®

UCAN’s Tie Wire Anchor®

Powers’ Tie Wire SPIKE Anchor®

Maximum static load should not exceed 100 lbs.

Packaged in boxes of 100 (4 lbs.) and master cartons of 1000 (39 lbs.).

See the ODM-250 Halt Bit and ODM Overhead Drill Machine for fast and easy installation.

STI Independent Testing

Silver zinc plated

Overall length is about 2-1/4″

Eyelet size about 9/32″

Length from collar to point is about 1-1/4″

Diameter: 1/4″

Hole is designed to accommodate 12-gauge ceiling wire, ¼” bolt or smooth rod

May be installed from the ground using an ODM-G2™ pole tool, ODM-250 SDS bit & I-WEDGE™ Installation tool

May be pre-tied to ceiling wire

Packaged in boxes of 100 (counted by weight)

Box weight: 4 lbs.

Testing performed at an IAS accredited lab in compliance with ISO/IEC 17025 & ASTM E488

I WEDGE TIE WIRE ANCHOR INSTALLATION TOOL ODM TELESCOPING POLE TOOL